Modeler's Mall
Hirobo Turbulence D3 Helicopter @ $1,499 + S&H from Model Rectifier Corporation, 80 Newfield Ave., Edison NJ 08837; Tel.: (732) 225-2100; Web site: www.modelrec.com.
The Turbulence D3 helicopter is Hirobo’s competition-grade 3-D model. It allows the pilot to perform the most extreme 3-D maneuvers with ease, precision, and repeatability.
The SSZ-IV rotor head provides 30° of pitch range with no binding. Cyclic range allows for nearly 9° of deflection. The dampening system is specialized and progressive, and it restricts feathering axle movement to the vertical axis.
The standard 2mm-thick G10 frames allow for easy access to all major components while providing a rigid platform. The minimalist main fuel-tank frame lowers vibration transmission to ensure consistent fuel delivery. A 100cc header tank to prevent half-tank lean-out and extend flight times is now standard.
A new clutch design allows for less setup time and fast engine removal. New CNC-cut Delrin gears allow the use of the most powerful .90-size power plants. The CNC aluminum high-torque autorotation unit is also standard equipment.
A new cooling fan shroud fully extends over the cooling fins of modern .90-size engines. This shroud is also compatible with the Eagle3 and Freya models when equipped with carbon lower frames.
The Turbulence sports a main rotor diameter of 59.85 to 63 inches and a length of 54.33 inches.
Neodym Electric Scimitar Props @ $1.99-$45 + S&H from Cermark, 9830 Bell Ranch Dr., Santa Fe Springs CA 90670; Tel.: (562) 906-0808; Web site: www.neodymmotors.com.
The new electric scimitar propellers are designed specifically to meet the demands of our high-performance electric-powered fliers. The wicked scimitar shape of these blades reduces wave drag at high radial velocity, because the propeller-tip turbulence is minimized through the specially designed upturned “tiplet.”
The disc or hub is lightened using multiple designed cavities. A complete set of shaft adapters is provided with every blade. These aerodynamic blades are made from improved composite for superior rigidity.
The unusual blade shape gives more power than your conventional electric propeller blades. Because they are more efficient, they will provide you with longer flights. Available in sizes from 4.1 to 30 inches.
Mitchell B-25J @ $99 + S&H from Wowplanes, Merritt Island FL 32954; Tel.: (321) 525-9779; Web site: www.wowplanes.com.
Wowplanes is offering a builder’s kit for Keith Sparks’ scale design of the world-famous WWII B-25 Mitchell bomber, in a popular 55-inch wingspan and weighing less than 4 pounds completed.
The kit includes all pre-shaped foam, a full set of quality plastics with scale details, six crew members, and a detailed, easy-to-follow online construction manual, which makes assembly quick. The B-25 can be fitted with retracts. Construction consists of EPS foam and Wowplanes sells Liquid Sheeting, which is applied over the foam to form a glossy, hard shell that can be painted.
Power provided by 480 brushless motors and a 25-amp speed control or Speed 480 Race brushed motors and a 35-amp speed control gives the versatility of brushed or brushless power.
Mustang Exhaust Kits @ $35-$50 including S&H from Pacific Scaled Aircraft, 14532 247 Dr. SE, Monroe WA 98272; Tel.: (360) 794-6036; Web site: www.pacific-scaled-aircraft.com.
These realistic exhaust kits are available for almost all 1/4- to 1/7-scale Mustangs from B through K models. They can be installed on kit-built models, ARCs, or ARFs. Each exhaust kit is scaled from reliable scale sources, including measurements taken from two full-scale Mustangs. Each kit faithfully replicates the distinctive Mustang exhaust system, improving any model’s looks.
The kits are prefabricated for easy installation. Pretinned exhaust stacks fit into sockets in cast-resin shrouds. There’s even a precision relief at the top of each tube socket in the shroud to help make it appear to be stamped metal. On some installations the exhaust stacks can be used for additional engine-bay cooling.
Kits include precut brass stack tubes, cast-resin shrouds, alignment fixtures as needed—even a mask for painting the stacks. Illustrated instructions are geared toward all skill levels. Scale detailing and painting suggestions are available on the Web site.
Spektrum DX5e @ $99.99 + S&H from Horizon Hobby Inc., 4105 Fieldstone Rd., Champaign IL 61822; Tel.: (800) 338-4639; Web site: www.spektrumrc.com.
The new DX5e is an affordable, full-range 2.4 GHz radio, allowing everyone to enjoy the benefits of DSM2 spread spectrum technology. Pilots who are into park flyers, trainers, or anything else that requires five or fewer channels can experience genuine DSM2 technology with its easy-to-use design.
Programming features include servo reversing, delta-wing mixing, and Hi and Low rates. It also features the JR and Spektrum compatible trainer system. Even a first-time flier will feel confident using the DX5e. No pins, no crystals, and no glitches—just the essentials for smooth, safe, stress-free flying.
The DX5e comes with an AR500 five-channel, full-range sport receiver. The transmitter is powered by the included AA alkaline batteries.
Hahn’s Hanger Fuel System @ $199.95 + S&H from Aeroworks, 4903 Nome St., Denver CO 80239; Tel.: (303) 371-4222; Web site: www.aero-works.net.
This all-in-one fueling system includes two openings for easy refilling. It has a concealed 6.0-volt, 2000 mA NiMH battery and charging jack. A Top Gun–style built-in safety switch requires you to lift the cover to access the switch, lift the switch to start the pump, and push the switch cover down to shut off the pump and protect the switch. An on and off switch eliminates accidental operation.
This fuel system features easy battery access for removal and charging at home or at the field without removing the pump unit, two-stage filter system, 3 feet of gas tubing, aluminum Teftra fuel probe, and can-stabilizing bracket.
The system is available in three colors, for gas, glow, smoke oil, and kerosene. It comes with a one-year manufacturer’s warranty.
R/C Reporter @ $24.95 + S&H from Winged Shadow Systems, Box 432, Streamwood IL 60107; Tel.: (630) 837-6553; Web site: www.wingedshadow.com.
Winged Shadow Systems has added an important feature to the popular R/C Reporter Multi-Function System Monitor. It now captures the minimum in-flight voltage. This provides the ultimate real-world load test for your airborne battery. In addition, the R/C Reporter functions as a lost-model locator, voltage monitor, voltmeter, and glitch counter.
All reports and functions are controlled with simple inputs from the transmitter. The R/C Reporter uses audio beeps to communicate. Simply count the beeps. The unit has the footprint of a postage stamp (1 x 3/4 inches) and the weight of a nickel (5 grams), so it is easily mounted in almost any RC model, from backyard flyer to Giant Scale.
It plugs into any receiver, just like a servo, and works with all RC systems that use industry-standard servos, including AM, FM, PCM, and spread spectrum (2.4 GHz) systems.
Transcribed from original scans by AI. Minor OCR errors may remain.
